All Products
-
Motorcycle Engine Parts
-
Motorcycle Electrical Components
-
Motorcycle Modification Parts
-
Motorcycle Brake System
-
Motorcycle Body Parts
-
Other Motorcycle Accessories
-
Motorcycle Light
-
Motorcycle Carburetor
-
Motorcycle Shock Absorber
-
Motorcycle Chains And Sprockets
-
Motorcycle Clutch
-
Motorcycle Piston
-
Motorcycle Exhaust Pipe
-
Motorcycle Cylinder
-
Motorcycle Lock
-
2222222
Contact Person :
Tan
Phone Number :
13516658764
Keywords [ motorbike spare part ] match 66 Products.
CG series Motorcycle oil Switch Fuel tank oil control valve (oil level display rod)
| Name Of Product: | CG Series Motorcycle Oil Switch |
|---|---|
| Material Quality: | Main Body: Metal Alloy; Oil Level Rod: Transparent Plastic; Seal: Oil Resistant Rubber |
| Function Of Function: | Control The Fuel Output From The Fuel Tank To The Carburetor, And Display The Amount Of Fuel Remaining In The Fuel Tank |
CG125 Motorcycle Chain Adjuster 2-Piece Rear Swingarm Chain Tensioner
| Product Name: | CG125 Chain Adjuster |
|---|---|
| Main Material: | Low-carbon Alloy Steel (quenching And Black Passivation Treatment) |
| Core Size: | Aperture 18mm, Thread M6, Length 45mm, Overall Size 87×32mm |
CG125 motorcycle complete oil seal kit engine crankshaft shock absorber seal
| Product Name: | CG125 Motorcycle Full Vehicle Oil Seal |
|---|---|
| Main Material: | Nitrile Rubber (NBR), Fluoro Rubber (FKM) Metal Framework |
| Core Specifications: | Crankshaft Oil Seal 22×35×7mm, Secondary Shaft Oil Seal 20×34×7mm, Ignition Oil Seal 16×28×7mm, Gear Shift Lever Oil Seal 14×28×7mm, Front Shock Absorber Oil Seal 27×37×9.5mm, Etc. |
CG125 motorcycle main shaft, suitable for Honda CG125, Pearl River CG125, Xingfu 125 and various other 125cc overhead cam engine models
| Product Name: | CG125 Centre Shaft |
|---|---|
| Diameter: | 12mm |
| Length: | 255mm |
CG125 Motorcycle Main Stand Shaft 40Cr Alloy Steel Main Support Pivot
| Product Name: | CG125 Motorcycle Main Stand Shaft |
|---|---|
| Main Material: | 40Cr Alloy Steel (Forged And Quenched And Tempered) |
| Core Size: | Diameter 17mm × Length 141mm (standard Specification, Customisable On Request) |
CG125 motorcycle brake pedal spring 65 manganese steel rear foot brake return spring
| Product Name: | CG125 Motorcycle Brake Pedal Spring |
|---|---|
| Main Material: | 65 Manganese Spring Steel (quenched, Rainbow Zinc Plated) |
| Elastic Coefficient: | Rebound Rate ≥98%, Fatigue Resistance Cycles ≥100,000 |
CG125 main frame spring large tension spring 105mm thickened manganese steel main stand return spring
| Product Name: | CG125 Motorcycle Main Stand Spring |
|---|---|
| Main Material: | 65 Manganese Spring Steel (quenched, Bright Zinc Plated) |
| Core Size: | Total Length 105mm, Wire Diameter 2.5mm, Outer Diameter 16mm, Inner Diameter 11mm |
CG125 side stand spring total length 100mm 65 manganese steel side bracket return spring
| Product Name: | CG125 Motorcycle Side Stand Spring |
|---|---|
| Main Material: | 65 Manganese Spring Steel (quenched, Bright Zinc Plated) |
| Core Dimensions: | Total Length 100mm, Wire Diameter 2.2mm, Outer Diameter 14mm |
CG125 brake light wire spring, brake switch reset pull spring, 125 push rod mechanism brake light trigger spring
| Product Name: | CG125 Motorcycle Brake Light Wire Spring |
|---|---|
| Main Material: | 65 Manganese Spring Steel (quenched, Bright Zinc Plated) |
| Core Dimensions: | The Total Length Is Adapted To The CG125 Original Specifications, With A Wire Diameter Of 1.8mm |
CG125 motorcycle air filter assembly air filter suitable for 125 pushrod engine intake filtration
| Product Name: | CG125 Motorcycle Air Filter Assembly |
|---|---|
| Main Structure: | Engineering Plastic Housing High-density Paper Filter Element |
| Function: | Filter Impurities From The Intake Air To Protect The Engine |