"motorbike body parts"
YBR125 Motorrad-Hintergabelanlage Hinterradstütze Metallrahmen
YBR125 motorcycle rear flat fork assembly, the installation hole position, axle sleeve size and the original frame completely match, directly replace the original rear flat fork without adjusting the rear wheel positioning; It is welded with thickened metal pipe, which has strong load-bearing ...
YBR125 Motorrad-Rückträger-Baugruppe Rückpassagier-Armlehnen-Trägerrahmen
YBR125 motorcycle rear tail frame assembly, the installation interface is fully matched with the original frame, directly replace the original rear tail frame without adjusting the fixed position; Welded by thickened pipe, strong load-bearing performance, suitable for the double needs of manned ...
YBR125 Motorrad-Vorderpedal-Gummibezug, rutschfester Stoßdämpfungs-Gummipedalbezug
YBR125 motorcycle front pedal rubber sleeve, inner diameter, shape and the original front pedal metal bracket match, directly into the no cutting adjustment; It is made of wear-resistant rubber, with anti-slip lines on the surface, which increases the friction of the foot and is not easy to slip ...
YBR125 Motorradvorstoßdämpfer Staubdichtes Achs-Hülle Vordergabelstoßdämpfer Schutzhülle
YBR125 motorcycle front shock absorber dustproof axle sleeve, the total length of 20cm, both ends of the inner diameter of 3cm/4.5cm and the original fork shock absorber completely match, directly into the no need to adjust the size; Made of wear-resistant rubber, strong flexibility, anti-aging, ...
Hochfeste CG125 Motorrad Hinterschwingarm Verdickter Carbonstahl Hinterarm
The CG125 motorcycle rear swingarm has mounting holes and axle dimensions that match the CG125 frame and rear wheel hub 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models. It can directly replace the original rear swingarm without modification. Made from thickened ...
CG125 Motorrad vollständige Öldichtung Kit Motor Kurbelwelle Stoßdämpferdichtung
CG125 motorcycle full oil seal kit, covering 5-8 key oil seal positions, including crankshaft oil seal (22×35×7mm), countershaft oil seal (20×34×7mm), front shock absorber oil seal (27×37×9.5mm) and other core specifications, with holes perfectly matching the engine, gearbox and shock absorbers, ...
CG125 Motorrad Vergaser, verschiedene Ausführungen, einschließlich Kraftstoffsystem-Kernkomponenten
CG125 motorcycle carbutor, 0294-0298 covers CG125 versions of different years, including PZ30 and other mainstream models, the interface, caliber and the original factory completely match, direct replacement without changing the fuel system; It is the core solution for power attenuation and ...
YBR125 Motorradkupplungsbaugruppe Druckplattenverformungswiderstand
YBR125 motorcycle clutch small assembly, pressure plate, steel seat size/interface and YBR125 clutch fully match, directly replace the original small assembly, no need to adjust the clutch mechanism; The main body adopts die-cast aluminum alloy + steel insert, high strength, deformation resistance, ...
YBR125 Motorrad-Vorbremsschwenkarm fünf Sätze Vorderbremssystem Getriebe Schwenkarm
YBR125 motorcycle front brake rocker arm, rocker arm size, installation hole position and the original front brake system fully match, direct replacement without adjusting the brake stroke; Including rocker arm body, adjusting screws and other full set of components, covering the front brake rocker ...
CG125 Motorradpedale Anti-Rutsch-Hinterradpedal-Gummischale Alterungsbeständig
CG125 motorcycle rear pedal, the installation interface and CG125 body rear pedal bracket fully match, directly stuck into the bracket can be fixed, without the need to modify the body; The foot surface adopts three-dimensional ripple design, which increases the friction of the foot and is not easy ...
CG125 Motorrad-Seitenverkleidung Gummi-Kit Schale fester Pufferkleber zur Befestigung der Stangen-Hebezeug-Maschinenteile
CG125 motorcycle side cover rubber kit, size, shape and CG125 side cover installation position exactly match, including side cover buckle glue + buffer rubber pad, directly replace the original side cover glue, without adjusting the side cover structure; The high elastic rubber material is used to ...
CG-Serie Motorradölschalter Brennstoffbehälter Ölregelventil (Ölstandanzeiger)
CG series motorcycle oil switch, interface specifications, installation size and CG series fuel tank fully match, directly replace the oil switch without adjusting the installation position; Support "ON (main oil) -RES (standby oil) -OFF" gear switch, precise control of fuel output, suitable for ...
