"motorbike spare parts"
CG125 Motorrad Bremspedalfeder 65 Manganstahl Hinterradbremse Rückholfeder
CG125 motorcycle brake pedal spring, with hook pitch and wire diameter perfectly matching the original vehicle holes, can be replaced directly without modification; made of 65 manganese spring steel cold-rolled, quenched and tempered, with a stable elastic coefficient (rebound rate ≥98%), fatigue ...
CG125 Hauptrahmenfeder große Zugfeder 105mm verdickter Manganstahl Hauptständer-Rückstellfeder
CG125 main stand spring, total length 105mm, hook spacing and wire diameter match the CG125 main stand holes 1:1; made from 65 manganese spring steel cold rolled, quenched using Japanese techniques, with a stable elasticity coefficient (rebound rate ≥98%), fatigue resistance over 150,000 cycles, ...
CG125 Seitenständerfeder Gesamtlänge 100mm 65 Manganstahl Seitenhalter Rückstellfeder
CG125 side stand spring, total length 100mm, hook dimensions match CG125 side stand and frame hook 1:1, suitable for Honda CG125, Pearl 125, Happiness XF125 and other 125cc upright engine models, direct replacement without modification; made of 65 manganese spring steel, formed with Japanese cold ...
CG125 Bremslicht Drahtfeder, Bremsschalter zurücksetzen Ziehfeder, 125 Schubstäbe Mechanismus Bremslicht Auslöserfeder
CG125 brake light spring, moulded 1:1 according to the CG125 brake light switch and frame hook, with hook dimensions perfectly matched, suitable for Honda CG125, Pearl River 125, Happiness XF125 and other 125cc top-post models, directly replaceable without modification; made of 65 manganese spring ...
CG125 Luftfilter für Motorräder
CG125 motorcycle air filter assembly, with installation clips and intake interface matching the CG125 engine intake and frame 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engines, directly replacing the original air filter without modification; equipped with a high-density ...
CG125 Motorrad links und rechts Schalter, kombinierter Steuerknopf, geeignet für 125 Schaltknoten für das Lenker eines Motorrads
CG125 motorcycle left and right switch assembly, including left switch (clutch/indicator/horn) and right switch (throttle/start/light), with mounting holes and wiring interfaces matching the CG125 handlebar and electrical system 1:1. Suitable for Honda CG125, Pearl River 125 and other 125cc overhead ...
CG125 Motorrad Links- und Rechtsgriffe Kupplung und Bremsgriffe geeignet für 125 Motorrad-Griffe
The CG125 motorcycle left and right handlebars, left (clutch) and right (brake) handlebars' mounting hole positions and dimensions match the CG125 handlebar and control components 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc top-lever motorcycle models, allowing direct ...
CG125 Motorrad-Zündkerzen D8TC-Modell geeignet für die Zündung von Motoren
CG125 motorcycle spark plug, thread size (M12×1.25), heat range (D8TC) matches the CG125 engine ignition system 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc push-rod engine models, directly replacing the original spark plug without adjustment; the electrode is made of iridium...
CG125 Motorrad-Innenröhre 2.50-18/2.75-18 Modell geeignet für 125 Spitzenstange Motor vorne und hinten Räder Innenröhre
CG125 motorcycle inner tube, 2.50-18 (front wheel), 2.75-18 (rear wheel) matches the CG125 corresponding tyre/hub size 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc rocker-engine models, directly replacing the original inner tube without adjustment; made of thickened butyl rubber, ...
CG125 Motorrad-Mittelschaft-Hülse, hintere Schwingenbuchse, passend für 125er-Wippenmotor, hintere Schwingen-Verbindungskomponenten
CG125 motorcycle centre axle bushing, dimensions (outer diameter 25mm / inner diameter 12mm / total length 34mm) perfectly match the connection holes of the CG125 rear swingarm and frame, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original ...
CG125 Motorrad Großes Zahnrad Bolzen Set Kettenrad Befestigungsbolzen und Muttern Set passend für 125 Stoßstangenmotor Kettenrad Teile
CG125 motorcycle large sprocket bolts, with bolt size and nut specifications matching CG125 sprocket (large teeth) and rear swingarm mounting holes 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original sprocket fasteners without ...
CG125 Motorrad-Kettengleitgummi, Kettenradschutzgummi, passend für 125er Stoßstangenmotor, verschleißfeste Teile
CG125 motorcycle chain guide rubber, with installation shape and size matching the CG125 rear swingarm sprocket 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc push-rod engine models, directly replacing the original guide rubber without modification; made of high-hardness oil...
