-
CG125 Motorrad-Zündkerzen D8TC-Modell geeignet für die Zündung von Motoren
CG125 motorcycle spark plug, thread size (M12×1.25), heat range (D8TC) matches the CG125 engine ignition system 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc push-rod engine models, directly replacing the original spark plug without adjustment; the electrode is made of iridium...
-
CG125 Motorrad Links- und Rechtsgriffe Kupplung und Bremsgriffe geeignet für 125 Motorrad-Griffe
The CG125 motorcycle left and right handlebars, left (clutch) and right (brake) handlebars' mounting hole positions and dimensions match the CG125 handlebar and control components 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc top-lever motorcycle models, allowing direct ...
-
CG125 Motorrad links und rechts Schalter, kombinierter Steuerknopf, geeignet für 125 Schaltknoten für das Lenker eines Motorrads
CG125 motorcycle left and right switch assembly, including left switch (clutch/indicator/horn) and right switch (throttle/start/light), with mounting holes and wiring interfaces matching the CG125 handlebar and electrical system 1:1. Suitable for Honda CG125, Pearl River 125 and other 125cc overhead ...
-
CG125 Luftfilter für Motorräder
CG125 motorcycle air filter assembly, with installation clips and intake interface matching the CG125 engine intake and frame 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engines, directly replacing the original air filter without modification; equipped with a high-density ...
-
CG125 Bremslicht Drahtfeder, Bremsschalter zurücksetzen Ziehfeder, 125 Schubstäbe Mechanismus Bremslicht Auslöserfeder
CG125 brake light spring, moulded 1:1 according to the CG125 brake light switch and frame hook, with hook dimensions perfectly matched, suitable for Honda CG125, Pearl River 125, Happiness XF125 and other 125cc top-post models, directly replaceable without modification; made of 65 manganese spring ...
-
CG125 Seitenständerfeder Gesamtlänge 100mm 65 Manganstahl Seitenhalter Rückstellfeder
CG125 side stand spring, total length 100mm, hook dimensions match CG125 side stand and frame hook 1:1, suitable for Honda CG125, Pearl 125, Happiness XF125 and other 125cc upright engine models, direct replacement without modification; made of 65 manganese spring steel, formed with Japanese cold ...
-
CG125 Hauptrahmenfeder große Zugfeder 105mm verdickter Manganstahl Hauptständer-Rückstellfeder
CG125 main stand spring, total length 105mm, hook spacing and wire diameter match the CG125 main stand holes 1:1; made from 65 manganese spring steel cold rolled, quenched using Japanese techniques, with a stable elasticity coefficient (rebound rate ≥98%), fatigue resistance over 150,000 cycles, ...
-
CG125 Motorrad Bremspedalfeder 65 Manganstahl Hinterradbremse Rückholfeder
CG125 motorcycle brake pedal spring, with hook pitch and wire diameter perfectly matching the original vehicle holes, can be replaced directly without modification; made of 65 manganese spring steel cold-rolled, quenched and tempered, with a stable elastic coefficient (rebound rate ≥98%), fatigue ...
