YBR125 motorcycle middle cylinder upper and lower pad suit, the hole position and size of the upper pad and lower pad match the YBR125 middle cylinder completely, directly replace the original gasket, no need to adjust the middle cylinder installation position; Using oil resistant rubber + metal ...
YBR125 motorcycle rear tail frame assembly, the installation interface is fully matched with the original frame, directly replace the original rear tail frame without adjusting the fixed position; Welded by thickened pipe, strong load-bearing performance, suitable for the double needs of manned ...
YBR125 motorcycle apron, the installation hole position, buckle and YBR125 frame interface fully match, directly replace the original apron without adjusting the body parts; Using high gloss black paint, with colorful "YAMAHA" logo, exquisite appearance and the original car style echoes; The main ...
YBR125 motorcycle starting disc gear, gear number, axle hole size and the original car starting mechanism completely match, directly replace the original starting disc without adjusting the meshing gap; The gear tooth surface adopts quenching treatment, high wear resistance, anti-tooth damage, to ...
CG125 headlight brackets, installation holes match 1:1 with CG125 front fork and headlight assembly, suitable for Honda CG125, Pearl 125 and other 125cc overhead valve motorcycles, directly replacing the original headlight brackets without modification; made of high-quality carbon steel stamping ...
CG125 motorcycle gear shift lever; the lever is made from 45# high-quality carbon steel forged in one piece, with a thickened design (14mm diameter), high strength, bend-resistant, difficult to break, and strong load-bearing capacity; the gear shift pedal head is made of anti-slip rubber with ...
The single-cylinder assembly of the CG125 is one of the core components of the cylinder kit, referring to an independent part that only includes the cylinder body itself. It serves as the carrier of the engine cylinder and is compatible with the 125cc single-cylinder four-stroke pushrod engine. It ...
The CG125 uses a single-cylinder, two-valve (1 intake, 1 exhaust) OHV (overhead valve with pushrod) valve mechanism. The valve assembly is the core of the engine's valve system, responsible for accurately opening and closing the intake and exhaust channels according to the engine cycle, ensuring the ...
Dejar un mensaje
¡Te llamaremos pronto!
¡Su mensaje debe tener entre 20 y 3000 caracteres!
¡Por favor revisa tu correo electrónico!
ENVIAR
Más información facilita una mejor comunicación.
Señor
Señor
Señora
DE ACUERDO
¡Enviado exitosamente!
¡Te llamaremos pronto!
DE ACUERDO
Dejar un mensaje
¡Te llamaremos pronto!
¡Su mensaje debe tener entre 20 y 3000 caracteres!
¡Por favor revisa tu correo electrónico!
ENVIAR
Por favor, deje su correo electrónico correcto y sus requisitos detallados (20-3000 caracteres).