All Products
-
Motorcycle Engine Parts
-
Motorcycle Electrical Components
-
Motorcycle Modification Parts
-
Motorcycle Brake System
-
Motorcycle Body Parts
-
Other Motorcycle Accessories
-
Motorcycle Light
-
Motorcycle Carburetor
-
Motorcycle Shock Absorber
-
Motorcycle Chains And Sprockets
-
Motorcycle Clutch
-
Motorcycle Piston
-
Motorcycle Exhaust Pipe
-
Motorcycle Cylinder
-
Motorcycle Lock
-
2222222
Contact Person :
Tan
Phone Number :
13516658764
Keywords [ motorcycle body accessories ] match 95 Products.
CG125 starter motor 12V 0.8KW suitable for Honda CG125, Zhuhai ZJ125, Xingfu XF125 125cc motorcycle starter motor
| Product Name: | CG125 Motor (Starter Motor) |
|---|---|
| Model: | 12V 0.8KW/1.0KW Starter Motor |
| Rated Voltage: | 12V DC |
CG125 RPM Cable Motorcycle Tachometer Cable Mechanical RPM Cable
| Product Name: | CG125 RPM Gauge |
|---|---|
| Core Material: | No. 70 High Carbon Steel (multi-strand Twisted) |
| Conduit Specifications: | PVC Outer Pipe (outer Diameter Approximately 16mm) Lubricated Bushing |
CG125 speedometer cable motorcycle odometer drive cable precise transmission mileage cable
| Product Name: | CG125 Speedometer Cable |
|---|---|
| Core Material: | No. 70 High Carbon Steel (1×19 Strand Twisted) |
| Conduit Specification: | PVC Outer Pipe (outer Diameter Approximately 16mm) PTFE Lubricated Bushing |
CG125 motorcycle lower rocker arm aluminium alloy top rod engine lower rocker arm assembly
| Product Name: | CG125 Motorcycle Lower Swingarm |
|---|---|
| Main Material: | Rocker Arm: ADC12 Reinforced Aluminium Alloy; Bearing: Steel Bushing; Fixed Shaft: 40Cr Alloy Steel |
| Core Dimensions: | Rocker Arm Length 168mm, Shaft Hole Diameter 18mm, Mounting Hole Spacing 105mm, Push Rod Contact Groove Width 12mm |
CG125 Camshaft Three-Piece Set 41 Tooth Top Push Rod Camshaft Bridge Teeth Rocker Shaft Compatible with 125/150 Motorcycles
| Product Name: | CG125 Cam Three-Piece Set |
|---|---|
| Compatible Models: | CG125/150/175 Pushrod Four-Stroke Single-Cylinder Engine |
| Material: | Camshaft: Alloy Cast Iron (quenched); Gears: Metal Quenched; Seals: Nitrile Rubber |
CG125 mudguard middle section black ABS rear mudguard connecting cover suitable for 125 top-bar motorcycle rear wheel mudguard middle section
| Product Name: | CG125 Mudguard Middle Section |
|---|---|
| Main Material: | High-strength ABS Engineering Plastic |
| Function: | Connect The Upper And Lower Sections Of The Rear Mudguard To Prevent Mud And Water From Splashing From The Middle Of The Rear Wheel |
CG125 valve, original factory specification, fits tightly with the valve seat ring
| Product Name: | CG125 Valve |
|---|---|
| Number Of Valves: | 2 Pieces (1 In 1 Row) |
| Valve Clearance (cold Engine): | Intake 0.03mm, Exhaust 0.03mm |
CG125 cylinder set, the core assembly of a single-cylinder four-stroke air-cooled engine
| Product Name: | CG125 Cylinder Set |
|---|---|
| Bore / Stroke: | Cylinder Bore 56.5mm, Stroke Approximately 49.5mm |
| Cylinder Block Dimensions: | Total Height Is Approximately 96.5mm, Installation Surface Height Is Approximately 68.25mm |
5-hole 6-plate clutch for CG125 model
| Number Of Holes: | 5 |
|---|---|
| Number Of Piece: | 6 |
| Quality: | Original Replacement |
CG125 rear wheel assembly 1.6×18 inch rim hub spoke set
| Product Name: | CG125 Motorcycle Rear Wheel Assembly |
|---|---|
| Main Material: | Rim: Thickened Steel Plate; Hub: Cast Steel; Spokes: Galvanized Steel |
| Core Dimensions: | 1.6×18 Inches (rim Width × Diameter), Compatible With CG125 Rear Axle |