"motorbike piston"
CG125 मोटरसाइकिल पिस्टन असेंबली प्लग 56.5mm बोर 15mm पिस्टन पिन
The CG125 piston set (piston assembly) does not include the cylinder liner and contains the piston, piston rings, piston pin, circlip, and top dead centre gasket. The piston is made of high-silicon aluminium alloy with a graphite coating for reduced friction and wear resistance; the piston rings are ...
उच्च शक्ति YBR125 मोटरसाइकिल सिलेंडर असेंबली में पिस्टन रिंग 54MM शामिल है
YBR125 motorcycle cylinder assembly, cylinder diameter 54MM, size parameters and YBR125 engine completely match, directly replace the original cylinder, no processing crankcase interface; Including cylinder block, piston, piston ring, piston pin, one-time complete cylinder core components, save the ...
CG125 मोटरसाइकिल कनेक्टिंग रॉड असेंबली 103.5 मिमी केंद्र दूरी 40Cr फोल्ड स्टील कनेक्टिंग रॉड पिस्टन पिन असर किट
CG125 motorcycle connecting rod, moulded 1:1 according to the original CG125 factory specifications, with a centre distance of 103.5mm, small end bore of 18mm, and big end bore of 45mm, perfectly matching the crankshaft and piston, directly replacing the old part without modifications, suitable for ...
रस्ट प्रूफ CG125 मोटरसाइकिल फ्रंट शॉक एब्सॉर्बर असेंबली 27 मिमी हाइड्रोलिक शॉक एब्सॉर्बर
CG125 front shock absorber assembly, tube diameter (27mm), total length (690mm), mounting holes match CG125 front fork and frame 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc push-rod models, directly replacing the original front shock absorber without modification; uses ...
CG125 मोटरसाइकिल सिलेंडर असेंबली जिसमें सिलेंडर ब्लॉक पिस्टन रिंग मल्टी सिलेंडर व्यास उपयुक्त रॉड जैकिंग मशीन शामिल है
CG125 motorcycle cylinder assembly, provide 56.5MM, 62MM cylinder diameter, with corresponding pin diameter/ring groove size, and CG125 engine with different displacement completely match, directly replace the original cylinder block components, no need to modify the engine structure; It includes ...
CG125 सिलेंडर सेट, सिंगल-सिलेंडर चार-स्ट्रोक एयर-कूल्ड इंजन की मुख्य असेंबली
The CG125 cylinder set is the core assembly of a single-cylinder, four-stroke, air-cooled engine, used in 125cc commuter motorcycles. It consists of a cylinder body, piston, piston rings, piston pin, circlip, and upper and lower gaskets, responsible for completing the four-stroke cycle of intake, ...
CG125 सिंगल-सिलेंडर, सिलेंडर कैरियर, कूलिंग कोर, पहनने के लिए प्रतिरोधी और टिकाऊ
The single-cylinder assembly of the CG125 is one of the core components of the cylinder kit, referring to an independent part that only includes the cylinder body itself. It serves as the carrier of the engine cylinder and is compatible with the 125cc single-cylinder four-stroke pushrod engine. It ...
CG125 वाल्व सीट रिंग नलिका इंजन सिलेंडर कोर घटकों के साथ मोटरसाइकिल वर्ग सिर सिलेंडर
CG125 motorcycle square head cylinder, cylinder body size, valve hole position and CG125 engine fully match, directly replace the original cylinder, compatible with the piston, cylinder head parts, no need to modify the engine structure; The surface dense heat dissipation bar increases the heat ...
CG125 मोटरसाइकिल एयर फिल्टर एसेम्ब्ली एयर फिल्टर 125 पुशरोड इंजन इनलेट फिल्टरेशन के लिए उपयुक्त
CG125 motorcycle air filter assembly, with installation clips and intake interface matching the CG125 engine intake and frame 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engines, directly replacing the original air filter without modification; equipped with a high-density ...
CG125 मोटरसाइकिल वाल्व तेल सील 4 सील रॉड जैकिंग मशीन के वाल्व भागों के लिए उपयुक्त हैं
CG125 motorcycle valve oil seal, size, material and CG125 intake and exhaust valve completely match, 4 installed to cover all valves, directly replace the crude oil seal, no need to adjust the valve assembly; Fluoro rubber material, long-term temperature resistance of 180℃, can withstand engine oil, ...
CG125 मोटरसाइकिल क्रैंकशाफ्ट असेंबली 13MM पिन व्यास जैकिंग रॉड मशीन इंजन पावर शाफ्ट
CG125 motorcycle crankshaft assembly, pin diameter of 13MM + shaft diameter parameters and CG125 engine completely match, directly replace the original crankshaft, compatible with the original car connecting rod, gear and other components, without the need to modify the engine structure; Using high ...
