"motorbike piston"
CG125 오토바이 피스톤 조립 플러그 56.5mm 뚫기 15mm 피스톤 핀
The CG125 piston set (piston assembly) does not include the cylinder liner and contains the piston, piston rings, piston pin, circlip, and top dead centre gasket. The piston is made of high-silicon aluminium alloy with a graphite coating for reduced friction and wear resistance; the piston rings are ...
고강도 YBR125 오토바이 실린더 어셈블리 피스톤 링 54MM 포함
YBR125 motorcycle cylinder assembly, cylinder diameter 54MM, size parameters and YBR125 engine completely match, directly replace the original cylinder, no processing crankcase interface; Including cylinder block, piston, piston ring, piston pin, one-time complete cylinder core components, save the ...
CG125 오토바이 연결 막대 조립 103.5mm 중심 거리 40Cr 가조 철 연결 막대 피스톤 핀 베어링 키트
CG125 motorcycle connecting rod, moulded 1:1 according to the original CG125 factory specifications, with a centre distance of 103.5mm, small end bore of 18mm, and big end bore of 45mm, perfectly matching the crankshaft and piston, directly replacing the old part without modifications, suitable for ...
강철 방지 CG125 오토바이크 전면 충격 흡수기 27mm 수압 충격 흡수기
CG125 front shock absorber assembly, tube diameter (27mm), total length (690mm), mounting holes match CG125 front fork and frame 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc push-rod models, directly replacing the original front shock absorber without modification; uses ...
CG125 모터사이클 실린더 앙상블과 실린더 블록 피스톤 링 다 실린더 지름
CG125 motorcycle cylinder assembly, provide 56.5MM, 62MM cylinder diameter, with corresponding pin diameter/ring groove size, and CG125 engine with different displacement completely match, directly replace the original cylinder block components, no need to modify the engine structure; It includes ...
CG125 실린더 세트, 단기통 4행정 공랭식 엔진의 핵심 부품
The CG125 cylinder set is the core assembly of a single-cylinder, four-stroke, air-cooled engine, used in 125cc commuter motorcycles. It consists of a cylinder body, piston, piston rings, piston pin, circlip, and upper and lower gaskets, responsible for completing the four-stroke cycle of intake, ...
CG125 단기통, 실린더 캐리어, 냉각 코어, 내마모성 및 내구성
The single-cylinder assembly of the CG125 is one of the core components of the cylinder kit, referring to an independent part that only includes the cylinder body itself. It serves as the carrier of the engine cylinder and is compatible with the 125cc single-cylinder four-stroke pushrod engine. It ...
CG125 밸브 좌석 반지 통로 엔진 실린더 코어 부품과 함께 모터사이클 정사각형 머리 실린더
CG125 motorcycle square head cylinder, cylinder body size, valve hole position and CG125 engine fully match, directly replace the original cylinder, compatible with the piston, cylinder head parts, no need to modify the engine structure; The surface dense heat dissipation bar increases the heat ...
CG125 오토바이 에어 필터 어셈블리, 125 푸시로드 엔진 흡기 여과에 적합한 에어 필터
CG125 motorcycle air filter assembly, with installation clips and intake interface matching the CG125 engine intake and frame 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engines, directly replacing the original air filter without modification; equipped with a high-density ...
CG125 오토바이 밸브 오일 밀폐 4 밀폐는 막 자킹 기계의 밸브 부품에 적합합니다
CG125 motorcycle valve oil seal, size, material and CG125 intake and exhaust valve completely match, 4 installed to cover all valves, directly replace the crude oil seal, no need to adjust the valve assembly; Fluoro rubber material, long-term temperature resistance of 180℃, can withstand engine oil, ...
CG125 오토바이 크랭크축 어셈블리 13MM 핀 직경 자키 로드 기계 엔진 동력축
CG125 motorcycle crankshaft assembly, pin diameter of 13MM + shaft diameter parameters and CG125 engine completely match, directly replace the original crankshaft, compatible with the original car connecting rod, gear and other components, without the need to modify the engine structure; Using high ...
