-
Minyak tahan YBR125 Motorcycle Rear Hub Buffer Body Total Aluminium Alloy
YBR125 motorcycle buffer body total, the installation hole position, size and YBR125 rear wheel transmission system fully match, directly replace the original buffer body, no need to modify the hub/slink wheel; Integrated rubber buffer block + bearing assembly, can effectively absorb transmission ...
-
Selang Rem Motor YBR125 Rem Depan Selang Tekanan Tinggi Panjang 930MM
YBR125 motorcycle brake oil pipe, length 930MM and YBR125 front brake pipe fully match, both ends of the joint is suitable for the upper and lower pump interface, direct replacement without cutting adjustment; The pipe body adopts high pressure rubber + braiding reinforcement layer, which is anti...
-
YBR125 Motor Brake Pump Set Front Brake Sistem Hidraulik Mudah Instalasi
YBR125 motorcycle brake up and down pump suit, the installation position of the upper pump and the hole distance of the lower pump match with the front fork/handlebar of YBR125 completely, without additional modification of the support, directly replace the original brake system; The combination of ...
-
Cakram Rem Depan Sepeda Motor YBR125 (06) Anti Karat Dengan Lima Lubang
YBR125 motorcycle disc, five hole mounting position and 06 YBR125 front wheel fully match, directly replace the original disc brake without adjusting the mounting bracket; The disk is equipped with double heat dissipation holes (inner ring big hole + outer ring small hole), which can quickly ...
-
YBR125 Alloy Motorcycle Brake Pump Front Brake Double Piston Caliper
YBR125 motorcycle brake pump, the installation hole distance of 48MM and YBR125 front fork brake position completely match, directly replace the original lower pump without adjusting the installation bracket; Built-in double piston structure, uniform braking thrust, strong and linear braking force, ...
-
Tahan korosi YBR125 Motor Brake Light Switch Spring Stainless Steel
YBR125 motorcycle brake light wire spring, spring + connecting rod combination size and YBR125 brake light switch/pedal interface exactly match, directly replace the original parts, no need to adjust the switch position; Connecting rod and spring are made of 304 stainless steel, rust and corrosion ...
