-
Resistente ao óleo YBR125 Corpo tampão do eixo traseiro da motocicleta Total Alumínio
YBR125 motorcycle buffer body total, the installation hole position, size and YBR125 rear wheel transmission system fully match, directly replace the original buffer body, no need to modify the hub/slink wheel; Integrated rubber buffer block + bearing assembly, can effectively absorb transmission ...
-
YBR125 Mangueira de travagem de motocicleta Mangueira de travagem dianteira de alta pressão comprimento 930 mm
YBR125 motorcycle brake oil pipe, length 930MM and YBR125 front brake pipe fully match, both ends of the joint is suitable for the upper and lower pump interface, direct replacement without cutting adjustment; The pipe body adopts high pressure rubber + braiding reinforcement layer, which is anti...
-
Conjunto da Bomba de Freio da Motocicleta YBR125 Sistema Hidráulico do Freio Dianteiro Fácil Instalação
YBR125 motorcycle brake up and down pump suit, the installation position of the upper pump and the hole distance of the lower pump match with the front fork/handlebar of YBR125 completely, without additional modification of the support, directly replace the original brake system; The combination of ...
-
Anti-ferrugem YBR125 (06) Frenagem de disco dianteiro de motocicleta com cinco buracos
YBR125 motorcycle disc, five hole mounting position and 06 YBR125 front wheel fully match, directly replace the original disc brake without adjusting the mounting bracket; The disk is equipped with double heat dissipation holes (inner ring big hole + outer ring small hole), which can quickly ...
-
Bomba de freio dianteira de motocicleta YBR125 Alloy, pinça de freio dianteiro com pistão duplo
YBR125 motorcycle brake pump, the installation hole distance of 48MM and YBR125 front fork brake position completely match, directly replace the original lower pump without adjusting the installation bracket; Built-in double piston structure, uniform braking thrust, strong and linear braking force, ...
-
Mola do Interruptor da Luz de Freio da Motocicleta YBR125 Resistente à Corrosão Aço Inoxidável
YBR125 motorcycle brake light wire spring, spring + connecting rod combination size and YBR125 brake light switch/pedal interface exactly match, directly replace the original parts, no need to adjust the switch position; Connecting rod and spring are made of 304 stainless steel, rust and corrosion ...
