"motorbike spare part"
CG125 오토바이 브레이크 페달 스프링 65 마랑제스 스틸 후발 브레이크 역 스프링
CG125 motorcycle brake pedal spring, with hook pitch and wire diameter perfectly matching the original vehicle holes, can be replaced directly without modification; made of 65 manganese spring steel cold-rolled, quenched and tempered, with a stable elastic coefficient (rebound rate ≥98%), fatigue ...
CG125 주요 프레임 스프링 큰 긴장 스프링 105mm 두꺼운 마랑제스 스틸 주요 스탠드 반환 스프링
CG125 main stand spring, total length 105mm, hook spacing and wire diameter match the CG125 main stand holes 1:1; made from 65 manganese spring steel cold rolled, quenched using Japanese techniques, with a stable elasticity coefficient (rebound rate ≥98%), fatigue resistance over 150,000 cycles, ...
CG125 사이드 스탠드 스프링 총 길이 100mm 65 망간강 사이드 브래킷 리턴 스프링
CG125 side stand spring, total length 100mm, hook dimensions match CG125 side stand and frame hook 1:1, suitable for Honda CG125, Pearl 125, Happiness XF125 and other 125cc upright engine models, direct replacement without modification; made of 65 manganese spring steel, formed with Japanese cold ...
CG125 브레이크 등 와이어 스프링, 브레이크 스위치 리셋 풀 스프링, 125 푸시 로드 메커니즘 브레이크 등 트리거 스프링
CG125 brake light spring, moulded 1:1 according to the CG125 brake light switch and frame hook, with hook dimensions perfectly matched, suitable for Honda CG125, Pearl River 125, Happiness XF125 and other 125cc top-post models, directly replaceable without modification; made of 65 manganese spring ...
CG125 오토바이 에어 필터 어셈블리, 125 푸시로드 엔진 흡기 여과에 적합한 에어 필터
CG125 motorcycle air filter assembly, with installation clips and intake interface matching the CG125 engine intake and frame 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engines, directly replacing the original air filter without modification; equipped with a high-density ...
CG125 오토바이 왼쪽 및 오른쪽 스위치 집합, 결합 제어 스위치, 125 푸시 스탠드 오토바이 핸들 제어 스위치에 적합
CG125 motorcycle left and right switch assembly, including left switch (clutch/indicator/horn) and right switch (throttle/start/light), with mounting holes and wiring interfaces matching the CG125 handlebar and electrical system 1:1. Suitable for Honda CG125, Pearl River 125 and other 125cc overhead ...
CG125 오토바이 좌우 핸들 클러치 및 브레이크 핸들 세트, 125 탑로드 오토바이 핸들바에 적합
The CG125 motorcycle left and right handlebars, left (clutch) and right (brake) handlebars' mounting hole positions and dimensions match the CG125 handlebar and control components 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc top-lever motorcycle models, allowing direct ...
CG125 오토바이 스파크 플러그 D8TC 모델 125 오버헤드 캠 엔진 발화 부품에 적합
CG125 motorcycle spark plug, thread size (M12×1.25), heat range (D8TC) matches the CG125 engine ignition system 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc push-rod engine models, directly replacing the original spark plug without adjustment; the electrode is made of iridium...
CG125 오토바이 튜브 2.50-18/2.75-18 모델, 125 탑 로드 엔진 앞뒤 바퀴 튜브에 적합
CG125 motorcycle inner tube, 2.50-18 (front wheel), 2.75-18 (rear wheel) matches the CG125 corresponding tyre/hub size 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc rocker-engine models, directly replacing the original inner tube without adjustment; made of thickened butyl rubber, ...
CG125 모터사이클 중앙 샤프트 수갑 후면 스윙어 팔 부시 125 로커 엔진 후면 스윙어 팔 연결 부품에 적합
CG125 motorcycle centre axle bushing, dimensions (outer diameter 25mm / inner diameter 12mm / total length 34mm) perfectly match the connection holes of the CG125 rear swingarm and frame, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original ...
CG125 오토바이 대형 기어 볼트 세트 125 스프레드 엔진 휠체어 부품에 적합한 휠체어 고정 볼트 및 견과류 세트
CG125 motorcycle large sprocket bolts, with bolt size and nut specifications matching CG125 sprocket (large teeth) and rear swingarm mounting holes 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original sprocket fasteners without ...
CG125 오토바이 체인 가이드 고무 스프로킷 가드 고무, 125 푸시로드 엔진 체인 마모 방지 부품에 적합
CG125 motorcycle chain guide rubber, with installation shape and size matching the CG125 rear swingarm sprocket 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc push-rod engine models, directly replacing the original guide rubber without modification; made of high-hardness oil...
