-
تجميع دواسة القدم الخلفية الجانبية المتكاملة لدراجة نارية YBR125 Cross Iron (موديل الطرق الوعرة اختياري)
YBR125 motorcycle horizontal iron assembly, the installation hole and rear rocker arm/frame interface fully match, directly replace the original horizontal iron without adjusting parts; Including rear foot, side support, spring and other components, one-stop solution to the rear passenger foot + ...
-
CG125 عجلة قيادة الدراجة النارية عبارة عن مشابك لوحة واحدة لوحة بدء لوحة جسم لوحة نقل أحادية الاتجاه
The CG125 clutch disc exceeds the original specifications, strictly replicating the CG125 factory standards. The internal teeth, positioning holes, and crank/starting gear match 100%, allowing direct replacement of old parts without modification. Made from 45# carbon steel with precision machining, ...
-
CG125 أسطوانة واحدة، حامل أسطوانة، قلب التبريد، مقاوم للاستعمال والمقاوم للاستعمال
The single-cylinder assembly of the CG125 is one of the core components of the cylinder kit, referring to an independent part that only includes the cylinder body itself. It serves as the carrier of the engine cylinder and is compatible with the 125cc single-cylinder four-stroke pushrod engine. It ...
-
مجموعة أسطوانة CG125، المجموعة الأساسية لمحرك رباعي الأشواط أحادي الأسطوانة مبرد بالهواء
The CG125 cylinder set is the core assembly of a single-cylinder, four-stroke, air-cooled engine, used in 125cc commuter motorcycles. It consists of a cylinder body, piston, piston rings, piston pin, circlip, and upper and lower gaskets, responsible for completing the four-stroke cycle of intake, ...
-
مجموعة عمود الكامات CG125 ثلاثية القطع، ترس علوي بـ 41 سنًا، عمود دفع علوي، أسنان جسر عمود الكامات، عمود هزاز متوافق مع دراجات نارية 125/150
The CG125 camshaft three-piece kit is a dedicated maintenance/replacement kit for the rocker arm-type valve mechanism, integrating the camshaft, bridge gear, rocker shaft and seals. It is used to address issues such as camshaft wear and valve timing disorders, and is compatible with the Honda CG125 ...
-
محرك بداية CG125 12V 0.8KW مناسب لـ Honda CG125 ، Zhuhai ZJ125 ، Xingfu XF125 125cc محرك بدء الدراجات النارية
The CG125 motor (starter motor) is the core component of the engine starting system. It drives the rotor to rotate via 12V DC power and drives the engine crankshaft through a reduction gear to achieve cold or hot engine starting. It is compatible with the Honda CG125 and Zhuhai ZJ125, Xingfu XF125, ...
-
صمام CG125، مواصفات المصنع الأصلية، يتناسب بإحكام مع حلقة مقعد الصمام
The CG125 uses a single-cylinder, two-valve (1 intake, 1 exhaust) OHV (overhead valve with pushrod) valve mechanism. The valve assembly is the core of the engine's valve system, responsible for accurately opening and closing the intake and exhaust channels according to the engine cycle, ensuring the ...
-
مجموعة ملف الإشعال لتوليد الطاقة وملف المغناطيس للدراجات النارية من سلسلة CG
CG series motorcycle magneto coil, coil size, wiring specifications and CG series engine magneto fully match, directly replace the original coil without adjusting the installation position; Integrated power generation winding + ignition winding, simultaneously provide electrical system power supply ...
