-
CG125 دراجة نارية مولد الدوار 12 فولت النيوديميوم الحديد بورون المغناطيس عجلة طائرة
CG125 motorcycle magneto rotor; 1:1 replica of the CG125 original specification, with taper hole taper (1:5), internal teeth / threaded interface fully matching the crankshaft, no modification required for direct replacement, suitable for most 125cc single-cylinder pushrod engines; the inner wall is ...
-
تجميعة قابض دراجة نارية CG125، 4 قضبان، 5 قطع، قلب قابض مُعزز
CG125 motorcycle clutch assembly, moulded 1:1 according to CG125 original specifications, covering mainstream specifications such as 4-pin 5-small-hole and 4-pin 5-large-hole, with mounting holes and spline dimensions perfectly matching the original gearbox main shaft, requiring no modifications or ...
-
ترس كبير للقابض للدراجة النارية CG125، 73 سنًا، لوحة قيادة القابض
CG125 motorcycle clutch large gear, 1:1 replica of the CG125 original specification, 8-slot 73-tooth standard design, spline size and mounting holes match the crankshaft and clutch small gear 100%, directly replacing the old parts without modification; teeth are precisely machined by CNC, tooth gap ...
-
CG125 صفيحة الاحتكاك للفضلات الخشبية مجموعة من 5 ألياف الكربون صفائح الفضلات المقاومة للاستخدام
CG125 clutch friction plates, 5 pieces, moulded according to CG125 original 4-pillar 5-piece specifications, inner diameter 91mm / outer diameter 119mm / thickness 3.15mm, metal positioning claws 100% match the small clutch slots, directly replacing old parts without modification; made of high...
-
صفائح احتكاك القابض CG125 مجموعة من 4 قطع فولاذية معالجة السطح
CG125 clutch friction plates 4-piece steel plate set, moulded according to CG125 wet clutch standards, inner diameter 91mm / outer diameter 119mm / thickness 1.5mm, inner spline perfectly meshes with the clutch hub, directly replacing old plates without modification; made from high-quality low...
-
مجموعة قابض الدراجة النارية CG125 من رقائق الخشب ورقائق الفولاذ
CG125 motorcycle clutch wood chips, covering ZT-CG-0248 (black formica chip + steel chip), 0249 (copper based wood chip), 0250 (reinforced steel chip) and other combinations, fully match with different clutch systems of CG125, directly replace the original friction plate without modification; The ...
-
مجموعة قابض دراجة نارية CG125 أنماط مختلفة بما في ذلك لوحة الاحتكاك
CG125 motorcycle clutch assembly, covering ZT-CG-0251 (split model), 0252/0254-0259 (integrated model) and other different structures, fully match with the whole version of CG125 clutch system, directly replace the original assembly without modification; Including friction plate (wood chip + steel ...
-
الصلب المصنوع من سبائك CG125 عجلة نارية مقبض أسنان كبيرة مقبض محرك أساسية
CG125 motorcycle clutch large teeth, gear number, installation hole position and CG125 clutch assembly fully match, directly replace the original large teeth, compatible with clutch plate, active tooth parts, without changing the transmission structure; High quality alloy steel forging + surface ...
