-
CG125 Ротор мотоциклетного генератора 12 В неодимовый магнит железного бора
CG125 motorcycle magneto rotor; 1:1 replica of the CG125 original specification, with taper hole taper (1:5), internal teeth / threaded interface fully matching the crankshaft, no modification required for direct replacement, suitable for most 125cc single-cylinder pushrod engines; the inner wall is ...
-
Сцепление мотоцикла CG125, 4 стержня, 5 деталей, усиленный сердечник сцепления
CG125 motorcycle clutch assembly, moulded 1:1 according to CG125 original specifications, covering mainstream specifications such as 4-pin 5-small-hole and 4-pin 5-large-hole, with mounting holes and spline dimensions perfectly matching the original gearbox main shaft, requiring no modifications or ...
-
Большая шестерня сцепления мотоцикла CG125, 73 зуба, ведущая пластина сцепления
CG125 motorcycle clutch large gear, 1:1 replica of the CG125 original specification, 8-slot 73-tooth standard design, spline size and mounting holes match the crankshaft and clutch small gear 100%, directly replacing the old parts without modification; teeth are precisely machined by CNC, tooth gap ...
-
Комплект фрикционных пластин сцепления CG125, деревянные детали, 5 штук, из углеродного волокна, износостойкие фрикционные пластины сцепления
CG125 clutch friction plates, 5 pieces, moulded according to CG125 original 4-pillar 5-piece specifications, inner diameter 91mm / outer diameter 119mm / thickness 3.15mm, metal positioning claws 100% match the small clutch slots, directly replacing old parts without modification; made of high...
-
CG125 Сцепление фрикционные пластины 4 штук стальной установки поверхность обработана
CG125 clutch friction plates 4-piece steel plate set, moulded according to CG125 wet clutch standards, inner diameter 91mm / outer diameter 119mm / thickness 1.5mm, inner spline perfectly meshes with the clutch hub, directly replacing old plates without modification; made from high-quality low...
-
CG125 Мотоциклетный сцепление комбинация деревянных и стальных щелчков
CG125 motorcycle clutch wood chips, covering ZT-CG-0248 (black formica chip + steel chip), 0249 (copper based wood chip), 0250 (reinforced steel chip) and other combinations, fully match with different clutch systems of CG125, directly replace the original friction plate without modification; The ...
-
CG125 Сборка сцепления мотоцикла Различные стили, включая пластину трения
CG125 motorcycle clutch assembly, covering ZT-CG-0251 (split model), 0252/0254-0259 (integrated model) and other different structures, fully match with the whole version of CG125 clutch system, directly replace the original assembly without modification; Including friction plate (wood chip + steel ...
-
Сплавная сталь CG125 Мотоциклетный сцепление Большой зуб сцепление Движение Основная передача
CG125 motorcycle clutch large teeth, gear number, installation hole position and CG125 clutch assembly fully match, directly replace the original large teeth, compatible with clutch plate, active tooth parts, without changing the transmission structure; High quality alloy steel forging + surface ...
