"motorbike cylinder"
Втулка направляющей клапана головки цилиндра мотоцикла CG125 подходит для деталей клапанов двигателя 125-кубовой штанговой машины.
CG125 motorcycle valve tube, the outer diameter, length and CG125 cylinder head valve hole, valve rod completely match, suitable for Honda CG125, Pearl River 125 and other 125cc jacking rod locomotive type, directly replace the original tube, without ream modification; Made of alloy cast iron, the ...
Сборка головки цилиндров используется для модели C110
Cylinder Head Assembly for C110 Model This precision-engineered cylinder head assembly is specifically designed for the C110 model, ensuring optimal performance and compatibility.
Сборка головки цилиндра используется для модели CG200
Cylinder Head Assembly for CG200 Model The cylinder head assembly is specifically designed for use with the CG200 model, ensuring optimal performance and compatibility.
Передняя вилка мотоцикла YBR125, двухцилиндровая, 745 мм, амортизатор мотоцикла
YBR125 motorcycle front shock assembly, size parameters (total length 745MM, aluminum tube 40MM, etc.) and the original front shock fully match, direct replacement without adjusting the Samsung plate; Built-in hydraulic damping system, stable shock filter effect, effectively buffer road bumps, ...
Масляный насос для мотоцикла CG125, 125 куб.см, одноцилиндровый, толкательный, шестеренчатый масляный насос в сборе, совместимый с Honda Zhuhai 125 cruiser
CG125 motorcycle oil pump, 1:1 replica of the original CG125 specifications, with mounting hole positions, gear module, and oil outlet interface 100% matching the original vehicle, directly replacing the old parts without modification; the pump body is made of high-quality ADC12 aluminium alloy die...
Масляный насос для мотоцикла CG125, 125 куб. см, одноцилиндровый, толкательный, шестеренчатый, в сборе
CG125 motorcycle oil pump, 1:1 reproduction of the original CG125 specifications, with mounting holes, gear module, and oil outlet interface 100% matching the original vehicle, allowing direct replacement of old parts without modification; the pump body is made of high-quality ADC12 aluminium alloy ...
CG125 Мотоцикл полный набор прокладки уплотнитель двигателя
CG125 motorcycle full gasket set, covering 20 key component gaskets including cylinder head gasket, crankcase gasket, side cover gasket, etc. The hole positions and thickness perfectly match engine block, cylinder head, gearbox and other parts, allowing direct replacement without modification, ...
Колпачок свечи зажигания CG125 для мотоцикла, высоковольтный колпачок, подходит для деталей зажигания верхнеклапанного двигателя 125.
CG125 motorcycle nozzle cap, interface size, high voltage insulation performance and CG125 spark plug, ignition line completely match, directly replace the original nozzle cap, no need to adjust the ignition system; Adopt high temperature insulating rubber material, can withstand high pressure above ...
CG125 Мотоциклет клапан масло уплотнение 4 уплотнения подходят для клапанных частей стержневой подъемной машины
CG125 motorcycle valve oil seal, size, material and CG125 intake and exhaust valve completely match, 4 installed to cover all valves, directly replace the crude oil seal, no need to adjust the valve assembly; Fluoro rubber material, long-term temperature resistance of 180℃, can withstand engine oil, ...
YBR125 мотоциклетный свечи CR6HSA сопротивление тип M10 * 12,7 мм зажигания
YBR125 motorcycle spark plug, thread specification (M10*12.7mm) and calorific value (CR6HSA) fully match YBR125 engine, direct replacement without adjustment; Built-in resistance element, effectively suppress electromagnetic interference, avoid affecting the vehicle circuit and electronic equipment; ...
Сборка шатуна мотоцикла CG125, расстояние между центрами 103,5 мм, кованая сталь 40Cr, комплект подшипника поршневого пальца
CG125 motorcycle connecting rod, moulded 1:1 according to the original CG125 factory specifications, with a centre distance of 103.5mm, small end bore of 18mm, and big end bore of 45mm, perfectly matching the crankshaft and piston, directly replacing the old part without modifications, suitable for ...
CG125 Мотоциклетная коленка с подвижной рукой из алюминиевого сплава
CG125 motorcycle rocker arm, moulded 1:1 according to CG125 original factory specifications, rocker arm length 145mm, shaft hole diameter 16mm, mounting holes and cam contact angles perfectly match the original engine cylinder head, directly replace old parts without modification; made of ADC12 high...
