"motorbike accessories"
CG125 Vorder- und Hinterradspitzen-Satz Verzinkte Stahlfelgen Spitzenmuttern
CG125 front and rear wheel spoke set, front spoke specifications 3×175MM, rear spoke 3.7×175MM, holes perfectly match CG125 front and rear rims and hubs; made of high-quality galvanized steel, cold drawn and formed, tempered with Japanese technology, tensile strength ≥600MPa, stable load-bearing and ...
CG125 Hinterrad-Baugruppe 1,6×18 Zoll Felgennabe Speichensatz
CG125 rear wheel assembly, size 1.6×18 inches, axle diameter and sprocket mounting position perfectly match CG125 rear axle and transmission system, compatible with Honda CG125, Pearl 125 and other 125cc pushrod models, can directly replace the original rear wheel without modification; made with ...
CG125 Motorseitenabdeckung CDI rote Dekorationsabdeckung Innenabdeckung
CG125 engine side cover, the mounting holes and clips match the CG125 engine case 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc overhead valve models, directly replacing the original engine side cover; includes red exterior cover and white inner cover, the exterior cover is made of ...
CG125 Vorderabschirm, glänzender, chromierter, gekrümmter Schlammschutz, kompatibel mit Vorderabschirm 125
CG125 front fender with a glossy chrome curved water shield, the curved dimensions perfectly fit the CG125 front wheel rim, and the mounting holes match the front fork bracket 1:1; made of thickened steel plate with a glossy chrome finish, salt spray test ≥120 hours, long-term use in rainy or muddy ...
CG125 Hinterradkotflügel, glänzend verchromter, gebogener Wasserabweiser, kompatibel mit 125er Stoßstangenmotor Hinterradkotflügel
CG125 rear mudguard, with an arched size perfectly fitting the CG125 rear wheel rim, installation holes matching the rear fork bracket 1:1; made of thickened steel plate with mirror chrome plating, salt spray test ≥120 hours, long-term use in rainy and muddy conditions without rusting, the glossy ...
CG125 Schlammschutzmittelteil schwarz ABS Rückschlammschutzmittelteil Anschlussabdeckung geeignet für 125 Motorrad-Oberstange Hinterradschlammschutzmittelteil
The CG125 middle fender section matches the installation clips and connecting grooves with the upper and lower sections of the CG125 rear fender 1:1, allowing direct replacement of the original middle fender without modification. It is made of high-strength ABS engineering plastic through injection ...
CG125 Rückspiegel-Bündel Rundreflexspiegel Chrom-Halterung Kompatibel mit 125 Spitzenstange Motorradkopf Rückspiegel
CG125 motorcycle rearview mirror assembly, threaded interface (M8) matches 1:1 with CG125 handlebar mounting holes, compatible with Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replaces the original mirrors without modification; silver-reflective glass, clear ...
CG125 Scheinwerferhalterung Chrom Metall Frontlampe Halterung passend für 125 Top Rod Motorrad Scheinwerfer Befestigung Halterung
CG125 headlight brackets, installation holes match 1:1 with CG125 front fork and headlight assembly, suitable for Honda CG125, Pearl 125 and other 125cc overhead valve motorcycles, directly replacing the original headlight brackets without modification; made of high-quality carbon steel stamping ...
CG125 Frontrad-Knotenstück Aluminium-Vorderrad-Knotenstück Kompatibel mit 125 Top Rod Machine Frontrad Spoke Hub
CG125 front wheel hub assembly, with axle hole dimensions and spoke hole positions matching the CG125 front axle and rim 1:1, suitable for Honda CG125, Zhujian 125 and other 125cc push-rod engine models, directly replacing the original front wheel hub without modifications; made of high-strength die...
CG125 Hinterradnabelbaugruppe aus Aluminiumlegierung Hinterradnabel (mit Zahnradposition) kompatibel mit Hinterradnabel der 125er-Pushrod-Motoren
CG125 rear hub assembly, with axle holes, spoke holes, and sprocket mounting positions that match 1:1 with the CG125 rear axle, wheel rim, and drive sprocket. Suitable for Honda CG125 and Pearl River 125 125cc pushrod engine models, it can directly replace the original rear hub without modification. ...
CG125 Motorrad-Anlasserscheibe hinter der Kupplungsbaugruppe, Hebestangen-Maschine, Motorstartteile
CG125 motorcycle starting disc, the installation hole position, internal tooth size and CG125 engine crampshaft, starting gear completely match, directly replace the original starting disc, without modification; Built-in one-way clutch, unidirectional power transmission when starting, automatically ...
CG125 Motorrad Nockenwellen-Zahnrad Steuerzahnrad Hebestange Maschinenmotor Ventilteile
CG125 motorcycle camshaft gear, the number of teeth, installation hole position and CG125 camshaft, crankshaft gear completely match, directly replace the gear, no need to adjust the air phase; Tooth shape by CNC precision machining, and crankshaft gear meshing gap is small, no virtual transmission, ...
