"motorbike accessories"
Jeu de rayons de roue avant et arrière CG125 en acier galvanisé, rayons de jante et écrous
CG125 front and rear wheel spoke set, front spoke specifications 3×175MM, rear spoke 3.7×175MM, holes perfectly match CG125 front and rear rims and hubs; made of high-quality galvanized steel, cold drawn and formed, tempered with Japanese technology, tensile strength ≥600MPa, stable load-bearing and ...
Ensemble de roue arrière CG125 jante 1,6×18 pouces, moyeu, rayons
CG125 rear wheel assembly, size 1.6×18 inches, axle diameter and sprocket mounting position perfectly match CG125 rear axle and transmission system, compatible with Honda CG125, Pearl 125 and other 125cc pushrod models, can directly replace the original rear wheel without modification; made with ...
CG125 CDI couverture décorative rouge couverture intérieure
CG125 engine side cover, the mounting holes and clips match the CG125 engine case 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc overhead valve models, directly replacing the original engine side cover; includes red exterior cover and white inner cover, the exterior cover is made of ...
Garde-boue avant CG125, garde-boue incurvé chromé brillant, compatible avec le garde-boue de roue avant 125 top-rod
CG125 front fender with a glossy chrome curved water shield, the curved dimensions perfectly fit the CG125 front wheel rim, and the mounting holes match the front fork bracket 1:1; made of thickened steel plate with a glossy chrome finish, salt spray test ≥120 hours, long-term use in rainy or muddy ...
CG125 protecteur de boue arrière, déflecteur d'eau courbé en chrome brillant, compatible avec le protecteur de boue de la roue arrière du moteur 125
CG125 rear mudguard, with an arched size perfectly fitting the CG125 rear wheel rim, installation holes matching the rear fork bracket 1:1; made of thickened steel plate with mirror chrome plating, salt spray test ≥120 hours, long-term use in rainy and muddy conditions without rusting, the glossy ...
Garde-boue CG125 section centrale noire ABS garde-boue arrière couvercle de raccordement adapté au garde-boue de roue arrière de moto 125 à barre supérieure section centrale
The CG125 middle fender section matches the installation clips and connecting grooves with the upper and lower sections of the CG125 rear fender 1:1, allowing direct replacement of the original middle fender without modification. It is made of high-strength ABS engineering plastic through injection ...
Ensemble de rétroviseurs CG125, miroir réfléchissant rond, support chromé, compatible avec moto 125 à tige supérieure, rétroviseur de tête
CG125 motorcycle rearview mirror assembly, threaded interface (M8) matches 1:1 with CG125 handlebar mounting holes, compatible with Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replaces the original mirrors without modification; silver-reflective glass, clear ...
CG125 monture de lampe frontale en métal chrome adaptée à 125 rouleaux de haut monture de fixation de phare de moto
CG125 headlight brackets, installation holes match 1:1 with CG125 front fork and headlight assembly, suitable for Honda CG125, Pearl 125 and other 125cc overhead valve motorcycles, directly replacing the original headlight brackets without modification; made of high-quality carbon steel stamping ...
Moyeu de roue avant CG125 en aluminium, compatible avec les machines 125 à tige supérieure, moyeu de rayon de roue avant
CG125 front wheel hub assembly, with axle hole dimensions and spoke hole positions matching the CG125 front axle and rim 1:1, suitable for Honda CG125, Zhujian 125 and other 125cc push-rod engine models, directly replacing the original front wheel hub without modifications; made of high-strength die...
CG125 assemblage de moyeu de roue arrière en alliage d'aluminium moyeu de roue arrière (avec position de roue dentée) compatible avec le moyeu de roue arrière à 125 roues motrices
CG125 rear hub assembly, with axle holes, spoke holes, and sprocket mounting positions that match 1:1 with the CG125 rear axle, wheel rim, and drive sprocket. Suitable for Honda CG125 and Pearl River 125 125cc pushrod engine models, it can directly replace the original rear hub without modification. ...
Disque de démarrage de moto CG125 au-delà de l'ensemble d'embrayage, tige de levage, pièces de démarrage du moteur de la machine
CG125 motorcycle starting disc, the installation hole position, internal tooth size and CG125 engine crampshaft, starting gear completely match, directly replace the original starting disc, without modification; Built-in one-way clutch, unidirectional power transmission when starting, automatically ...
Pignon d'arbre à cames de moto CG125, pignon de distribution, tige de levage, moteur de machine, pièces de soupape
CG125 motorcycle camshaft gear, the number of teeth, installation hole position and CG125 camshaft, crankshaft gear completely match, directly replace the gear, no need to adjust the air phase; Tooth shape by CNC precision machining, and crankshaft gear meshing gap is small, no virtual transmission, ...
