"motorbike accessories"
CG125 앞바퀴와 뒷바퀴 스파이크 세트
CG125 front and rear wheel spoke set, front spoke specifications 3×175MM, rear spoke 3.7×175MM, holes perfectly match CG125 front and rear rims and hubs; made of high-quality galvanized steel, cold drawn and formed, tempered with Japanese technology, tensile strength ≥600MPa, stable load-bearing and ...
CG125 리어 휠 어셈블리 1.6×18인치 림 허브 스포크 세트
CG125 rear wheel assembly, size 1.6×18 inches, axle diameter and sprocket mounting position perfectly match CG125 rear axle and transmission system, compatible with Honda CG125, Pearl 125 and other 125cc pushrod models, can directly replace the original rear wheel without modification; made with ...
CG125 엔진 사이드 커버 CDI 빨간색 장식 커버 내부 커버 세트
CG125 engine side cover, the mounting holes and clips match the CG125 engine case 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc overhead valve models, directly replacing the original engine side cover; includes red exterior cover and white inner cover, the exterior cover is made of ...
CG125 앞 펜더, 광택 크롬 곡선 머드가드, 125 탑 로드 앞바퀴 펜더와 호환
CG125 front fender with a glossy chrome curved water shield, the curved dimensions perfectly fit the CG125 front wheel rim, and the mounting holes match the front fork bracket 1:1; made of thickened steel plate with a glossy chrome finish, salt spray test ≥120 hours, long-term use in rainy or muddy ...
CG125 후면 진흙 보호기, 반짝이는 크롬 곡선 물 반사기, 125 스프러드 엔진 후면 바퀴 진흙 보호기와 호환
CG125 rear mudguard, with an arched size perfectly fitting the CG125 rear wheel rim, installation holes matching the rear fork bracket 1:1; made of thickened steel plate with mirror chrome plating, salt spray test ≥120 hours, long-term use in rainy and muddy conditions without rusting, the glossy ...
CG125 진흙 보호 중앙 섹션 검은 ABS 후면 진흙 보호 연결 덮개 125 최고 바 오토바이 후기 바퀴 진흙 보호 중앙 섹션에 적합
The CG125 middle fender section matches the installation clips and connecting grooves with the upper and lower sections of the CG125 rear fender 1:1, allowing direct replacement of the original middle fender without modification. It is made of high-strength ABS engineering plastic through injection ...
CG125 백미러 어셈블리 둥근 반사 거울 크롬 브래킷 세트, 125 탑 로드 오토바이 헤드 후진 거울과 호환
CG125 motorcycle rearview mirror assembly, threaded interface (M8) matches 1:1 with CG125 handlebar mounting holes, compatible with Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replaces the original mirrors without modification; silver-reflective glass, clear ...
CG125 헤드라이트 브래킷 크롬 금속 전면 램프 마운트 125 탑 로드 오토바이 헤드라이트 고정 마운트에 적합
CG125 headlight brackets, installation holes match 1:1 with CG125 front fork and headlight assembly, suitable for Honda CG125, Pearl 125 and other 125cc overhead valve motorcycles, directly replacing the original headlight brackets without modification; made of high-quality carbon steel stamping ...
CG125 앞바퀴 허브 조립 알루미늄 앞바퀴 허브 125 톱 스드 머신과 호환
CG125 front wheel hub assembly, with axle hole dimensions and spoke hole positions matching the CG125 front axle and rim 1:1, suitable for Honda CG125, Zhujian 125 and other 125cc push-rod engine models, directly replacing the original front wheel hub without modifications; made of high-strength die...
CG125 리어 휠 허브 어셈블리 알루미늄 합금 리어 휠 허브 (스프로킷 위치 포함) 125 푸시로드 엔진 리어 휠 스포크 허브와 호환
CG125 rear hub assembly, with axle holes, spoke holes, and sprocket mounting positions that match 1:1 with the CG125 rear axle, wheel rim, and drive sprocket. Suitable for Honda CG125 and Pearl River 125 125cc pushrod engine models, it can directly replace the original rear hub without modification. ...
CG125 오토바이 시동 디스크 클러치 어셈블리 너머 잭킹 로드 기계 엔진 시동 부품
CG125 motorcycle starting disc, the installation hole position, internal tooth size and CG125 engine crampshaft, starting gear completely match, directly replace the original starting disc, without modification; Built-in one-way clutch, unidirectional power transmission when starting, automatically ...
CG125 오토바이 램샤프트 기어 타이밍 기어 자킹 막대기 기계 엔진 밸브 부품
CG125 motorcycle camshaft gear, the number of teeth, installation hole position and CG125 camshaft, crankshaft gear completely match, directly replace the gear, no need to adjust the air phase; Tooth shape by CNC precision machining, and crankshaft gear meshing gap is small, no virtual transmission, ...
