"motorcycle piston set"
Hochfeste Stahl CG125 Motorradkolben mit Kolbenring Kolbenklemm
CG125 motorcycle piston set, provide 56.5MM, 62MM, 63.5MM cylinder diameter, with 13MM/15MM pin diameter and corresponding ring groove size, completely match the cylinder/connecting rod of CG125 engine with different displacement, directly replace the original piston assembly; Including piston, ...
CG125 Motorradkolbenring mit mehreren Zylinderdurchmesser
CG125 motorcycle piston ring set, providing 56.5MM, 62MM, 63.5MM, 67MM cylinder diameter, with corresponding ring socket size (such as 0.8×0.8×2.0, 1.2×1.2×2.5, etc.), completely match the piston/cylinder of CG125 engine with different displacement, directly replace the original piston ring; ...
YBR125 Motorradkolbenring Set 54 mm Zylinder Durchmesser 1.01.02.0 Ringgroove
YBR125 motorcycle piston ring set, cylinder diameter 54MM, ring groove specification 1.01.02.0MM, perfect match YBR125 piston/cylinder, direct replacement without adjustment; Including air ring (2) + oil ring (1), the air ring is responsible for cylinder sealing pressure, the oil ring is responsible ...
CG125 Motorradverbindungsstange 103,5 mm Abstand zum Mittelpunkt 40Cr geschmiedetem Stahlverbindungsstange Kolben-Stiftlager-Set
CG125 motorcycle connecting rod, moulded 1:1 according to the original CG125 factory specifications, with a centre distance of 103.5mm, small end bore of 18mm, and big end bore of 45mm, perfectly matching the crankshaft and piston, directly replacing the old part without modifications, suitable for ...
YBR125 Motorrad-Bremspumpen-Set Vorderradbremse Hydrauliksystem Einfache Installation
YBR125 motorcycle brake up and down pump suit, the installation position of the upper pump and the hole distance of the lower pump match with the front fork/handlebar of YBR125 completely, without additional modification of the support, directly replace the original brake system; The combination of ...
YBR125 Motorrad Kurbelwellen-Baugruppe, Legierung, geschmiedeter Stahl
YBR125 motorcycle crankshaft assembly, shaft diameter, connecting rod size and 17T sket are fully matched with YBR125 engine, directly replace the original crankshaft, no need to modify the box; Before leaving the factory by professional dynamic balance detection, running vibration is small, reduce ...
CG125 Zylindersatz, die Kernbaugruppe eines Einzylinder-Viertakt-Luftkühlmotors
The CG125 cylinder set is the core assembly of a single-cylinder, four-stroke, air-cooled engine, used in 125cc commuter motorcycles. It consists of a cylinder body, piston, piston rings, piston pin, circlip, and upper and lower gaskets, responsible for completing the four-stroke cycle of intake, ...
