"motorcycle piston set"
高強度鋼 CG125 オートバイピストンセット、ピストンリング、ピストンピン付き
CG125 motorcycle piston set, provide 56.5MM, 62MM, 63.5MM cylinder diameter, with 13MM/15MM pin diameter and corresponding ring groove size, completely match the cylinder/connecting rod of CG125 engine with different displacement, directly replace the original piston assembly; Including piston, ...
CG125 オートバイ ピストンリングセット、ロッドジャッキエンジン用複数シリンダー径
CG125 motorcycle piston ring set, providing 56.5MM, 62MM, 63.5MM, 67MM cylinder diameter, with corresponding ring socket size (such as 0.8×0.8×2.0, 1.2×1.2×2.5, etc.), completely match the piston/cylinder of CG125 engine with different displacement, directly replace the original piston ring; ...
YBR125 オートバイ ピストンリングセット 54MM シリンダー直径 1.0 1.0 2.0 リング溝
YBR125 motorcycle piston ring set, cylinder diameter 54MM, ring groove specification 1.01.02.0MM, perfect match YBR125 piston/cylinder, direct replacement without adjustment; Including air ring (2) + oil ring (1), the air ring is responsible for cylinder sealing pressure, the oil ring is responsible ...
CG125 オートバイ コネクティングロッドアセンブリ 中心距離103.5mm 40Cr 鍛造鋼コネクティングロッド ピストンピン ベアリングキット
CG125 motorcycle connecting rod, moulded 1:1 according to the original CG125 factory specifications, with a centre distance of 103.5mm, small end bore of 18mm, and big end bore of 45mm, perfectly matching the crankshaft and piston, directly replacing the old part without modifications, suitable for ...
YBR125 モーターサイクルのブレーキポンプセット フロントブレーキ 液圧システム 簡単に設置
YBR125 motorcycle brake up and down pump suit, the installation position of the upper pump and the hole distance of the lower pump match with the front fork/handlebar of YBR125 completely, without additional modification of the support, directly replace the original brake system; The combination of ...
YBR125 モーターサイクルのクランクシャフト組合体合金鍛造鋼材
YBR125 motorcycle crankshaft assembly, shaft diameter, connecting rod size and 17T sket are fully matched with YBR125 engine, directly replace the original crankshaft, no need to modify the box; Before leaving the factory by professional dynamic balance detection, running vibration is small, reduce ...
CG125 シリンダーセット、単気筒4ストローク空冷エンジンのコアアセンブリ
The CG125 cylinder set is the core assembly of a single-cylinder, four-stroke, air-cooled engine, used in 125cc commuter motorcycles. It consists of a cylinder body, piston, piston rings, piston pin, circlip, and upper and lower gaskets, responsible for completing the four-stroke cycle of intake, ...
