7 의 결과

"motorcycle piston set"

품질 고강도 강철 CG125 오토바이 피스톤 세트 (피스톤 링, 피스톤 핀 포함) 공장

고강도 강철 CG125 오토바이 피스톤 세트 (피스톤 링, 피스톤 핀 포함)

CG125 motorcycle piston set, provide 56.5MM, 62MM, 63.5MM cylinder diameter, with 13MM/15MM pin diameter and corresponding ring groove size, completely match the cylinder/connecting rod of CG125 engine with different displacement, directly replace the original piston assembly; Including piston, ...

품질 CG125 모터사이클 피스톤 링 세트 다중 실린더 지름 로드 잭 엔진 공장

CG125 모터사이클 피스톤 링 세트 다중 실린더 지름 로드 잭 엔진

CG125 motorcycle piston ring set, providing 56.5MM, 62MM, 63.5MM, 67MM cylinder diameter, with corresponding ring socket size (such as 0.8×0.8×2.0, 1.2×1.2×2.5, etc.), completely match the piston/cylinder of CG125 engine with different displacement, directly replace the original piston ring; ...

품질 YBR125 오토바이 피스톤 링 세트 54MM 실린더 지름 1.01.02.0 링 굴곡 공장

YBR125 오토바이 피스톤 링 세트 54MM 실린더 지름 1.01.02.0 링 굴곡

YBR125 motorcycle piston ring set, cylinder diameter 54MM, ring groove specification 1.01.02.0MM, perfect match YBR125 piston/cylinder, direct replacement without adjustment; Including air ring (2) + oil ring (1), the air ring is responsible for cylinder sealing pressure, the oil ring is responsible ...

품질 CG125 오토바이 연결 막대 조립 103.5mm 중심 거리 40Cr 가조 철 연결 막대 피스톤 핀 베어링 키트 공장

CG125 오토바이 연결 막대 조립 103.5mm 중심 거리 40Cr 가조 철 연결 막대 피스톤 핀 베어링 키트

CG125 motorcycle connecting rod, moulded 1:1 according to the original CG125 factory specifications, with a centre distance of 103.5mm, small end bore of 18mm, and big end bore of 45mm, perfectly matching the crankshaft and piston, directly replacing the old part without modifications, suitable for ...

품질 YBR125 오토바이 브레이크 펌프 세트 앞 브레이크 유압 시스템 간편 설치 공장

YBR125 오토바이 브레이크 펌프 세트 앞 브레이크 유압 시스템 간편 설치

YBR125 motorcycle brake up and down pump suit, the installation position of the upper pump and the hole distance of the lower pump match with the front fork/handlebar of YBR125 completely, without additional modification of the support, directly replace the original brake system; The combination of ...

품질 YBR125 오토바이 크랭크샤프트 어셈블리 합금 단조강 재질 공장

YBR125 오토바이 크랭크샤프트 어셈블리 합금 단조강 재질

YBR125 motorcycle crankshaft assembly, shaft diameter, connecting rod size and 17T sket are fully matched with YBR125 engine, directly replace the original crankshaft, no need to modify the box; Before leaving the factory by professional dynamic balance detection, running vibration is small, reduce ...

품질 CG125 실린더 세트, 단기통 4행정 공랭식 엔진의 핵심 부품 공장

CG125 실린더 세트, 단기통 4행정 공랭식 엔진의 핵심 부품

The CG125 cylinder set is the core assembly of a single-cylinder, four-stroke, air-cooled engine, used in 125cc commuter motorcycles. It consists of a cylinder body, piston, piston rings, piston pin, circlip, and upper and lower gaskets, responsible for completing the four-stroke cycle of intake, ...