"motorcycle modification accessories"
CG125 मोटरसाइकिल क्लच के बॉडी में फिक्सिंग स्क्रू होते हैं और यह रॉड जैकिंग मशीन के अनुकूल होता है
CG125 motorcycle clutch body, including ZT-CG-0244 (porous type), 0245 (basic type), 0246 (bearing type), fully match with different versions of CG125 clutch system, directly replace the original body without modification; The disc is made of high-strength alloy material, which is resistant to ...
CG125 मोटरसाइकिल स्टार्टिंग बीड सेट में स्प्रिंग रॉड जैकिंग मशीन स्टार्टिंग सिस्टम के घटक शामिल हैं
CG125 motorcycle starting bead suit, starting bead size, spring elasticity and CG125 starting system fully match, directly replace the original parts, compatible with starting plate, starting gear and other structures, without modification; The starting bead is made of high quality alloy steel, with ...
CG125 मोटरसाइकिल के निचले रॉकर आर्म सेट में रॉकर आर्म शाफ्ट सील रिंग टॉप रॉड मशीन वायु वितरण भाग शामिल हैं
CG125 motorcycle lower rocker arm suit, rocker arm size, rocker arm shaft diameter and CG125 valve system fully match, directly replace the original parts, compatible with camshaft, valve and other structures, without modification; The rocker arm is forged with high strength alloy, resistant to ...
CG125 मोटरसाइकिल ओवरराइड क्लच एकल प्लेट स्टार्टर प्लेट शरीर एक तरफा ट्रांसमिशन प्लेट
The CG125 clutch disc exceeds the original specifications, strictly replicating the CG125 factory standards. The internal teeth, positioning holes, and crank/starting gear match 100%, allowing direct replacement of old parts without modification. Made from 45# carbon steel with precision machining, ...
CG125 मोटरसाइकिल लोअर रॉकर आर्म एल्यूमीनियम मिश्र धातु टॉप रॉड इंजन लोअर रॉकर आर्म संयोजन
CG125 rocker arm, rocker arm length 168mm, shaft hole diameter 18mm, mounting hole positions and rocker contact groove dimensions perfectly match the original engine cylinder block and rocker, allowing direct replacement without modification, suitable for 125cc single-cylinder pushrod engine valve ...
CG125 मोटरसाइकिल रॉकर आर्म एल्यूमीनियम मिश्र धातु टॉप रॉड रॉकर आर्म असेंबली
CG125 motorcycle rocker arm, moulded 1:1 according to CG125 original factory specifications, rocker arm length 145mm, shaft hole diameter 16mm, mounting holes and cam contact angles perfectly match the original engine cylinder head, directly replace old parts without modification; made of ADC12 high...
CG125 स्पीडोमीटर केबल मोटरसाइकिल ओडोमीटर ड्राइव केबल सटीक ट्रांसमिशन माइलेज केबल
CG125 speedometer cable for motorcycle odometer; custom-moulded 1:1 to match the original, with precise length, connector thread and routing curves, ready to install without modification; core made of high-carbon steel No. 70 (1×19 strand), tensile and wear resistant, not easy to break, accurate ...
CG125 मडगार्ड मध्य खंड काला ABS रियर मडगार्ड कनेक्टिंग कवर 125 टॉप-बार मोटरसाइकिल रियर व्हील मडगार्ड मध्य खंड के लिए उपयुक्त
The CG125 middle fender section matches the installation clips and connecting grooves with the upper and lower sections of the CG125 rear fender 1:1, allowing direct replacement of the original middle fender without modification. It is made of high-strength ABS engineering plastic through injection ...
YBR125 मोटरसाइकिल गियर शिफ्ट लीवर क्रोम प्लेटेड डुअल नॉन स्लिप शिफ्ट कंट्रोल पार्ट्स
YBR125 motorcycle shift lever, the installation hole position, rod body Angle and YBR125 transmission shift mechanism fully match, directly replace the original shift lever, without modification; The body of the rod is made of high carbon steel with chrome plating, which has high strength, bending ...
CG125 मोटरसाइकिल फ्रंट हेडलाइट असेंबली इंजीनियरिंग प्लास्टिक गर्मी प्रतिरोधी
The CG125 front headlight assembly uses the original factory square lamp, with mounting holes that match the CG125 headlight bracket 1:1. It is suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models, and can replace the original headlight directly without modification. It ...
CG125 मोटरसाइकिल के हैंडल चमकदार क्रोम इलेक्ट्रोप्लाटिंग आसान स्थापना
CG125 motorcycle handlebar, with pipe diameter and mounting hole positions matching the CG125 handlebar stem 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc overhead valve models, directly replacing the original handlebar without modification; made of thickened carbon steel tube with ...
CG125 मोटरसाइकिल ईंधन टैंक चमकदार लाल क्लासिक शैली लगभग 12L
CG125 motorcycle fuel tank, with mounting holes and fixing clips that match the CG125 frame fuel tank 1:1, suitable for Honda CG125, Zhujiang 125 and other 125cc overhead valve models, directly replacing the original fuel tank without modification; made of 1.2mm cold-rolled steel plate, stamped and ...
