"motorcycle body accessories"
YBR125 오토바이 액세서리 웨이브 플레이트 베어링 25/30MM 스러스트 볼 베어링 부품
YBR125 motorcycle wave plate bearing, the inner diameter of the upper bead top is 25MM, the inner diameter of the lower bead top is 30MM, the outer diameter of the steel bowl is 48MM, and the installation position of the YBR125 wave plate is completely matched, direct replacement without adjusting ...
방염 CG 시리즈 오토바이 잠금 전기 도어 잠금 마모 방지
CG series motorcycle electric door lock, the installation hole position, wiring specifications and CG series motorcycle power supply system fully match, directly replace the original electric door lock without adjusting the line; Support "OFF (power off) -ON (power on) -ACC (accessory)" gear switch, ...
YBR125 오토바이 브레이크 호스 앞 브레이크 고압 호스 길이 930MM
YBR125 motorcycle brake oil pipe, length 930MM and YBR125 front brake pipe fully match, both ends of the joint is suitable for the upper and lower pump interface, direct replacement without cutting adjustment; The pipe body adopts high pressure rubber + braiding reinforcement layer, which is anti...
CG125 오토바이 액세서리 배기 파이프 나사 너트 세트 스테인리스 스틸
CG125 motorcycle exhaust pipe screw and nut set, the size and thread of the screw and nut match the CG125 exhaust pipe installation hole, directly replace the original fixed parts, no need to modify the exhaust pipe/cylinder head interface; Stainless steel + copper plating process, sun and rain ...
다중 위치 YBR125 키 전원 제어 장치와 함께 오토바이 잠금
YBR125 motorcycle electric door lock, lock body size, installation hole position and YBR125 handlebar interface fully match, wiring specifications compatible with the original factory circuit, direct replacement without changing the hole/line; Support "OFF (power off) -ON (power on) -ACC (accessory ...
엔진 시작 시스템에 대한 다단계 CG125 오토바이 시작 샤프트
CG125 motorcycle starting shaft, shaft body size, gear/spline structure and CG125 starting system fully match, directly replace the original starting shaft, compatible with starting plate, starting gear and other components, without changing the starting structure; Using high quality alloy steel ...
합금강 YBR125 오토바이 캠축 베어링 O링 내마모성
YBR125 motorcycle camshaft, shaft diameter, CAM profile and YBR125 cylinder head exactly match, with the outer 6003 / inner 6002 bearing + O-ring, directly replace the original camshaft, no additional purchase of accessories; Using Japanese technology processing, CAM profile accurately matches the ...
경직 방지 YBR125 오토바이 실린더 헤드 조립 엔진 실린더 헤드 조립
YBR125 motorcycle cylinder head assembly, cylinder head, side cover, seals and other accessories are fully matched with the engine, one-stop replacement without additional purchase of accessories; Cylinder head and side cover are made of high strength aluminum alloy casting, excellent heat ...
YBR125 오토바이 액세서리 체인 상단 타이밍 체인 자동 텐셔너
YBR125 motorcycle chain top, the installation hole position, push rod size and YBR125 engine timing chain cabin fully match, directly replace the original chain top without adjusting the installation position; Built-in spring/hydraulic automatic tensioning structure, real-time compensation of the ...
CG125 오토바이 전등 조립 공학 플라스틱 열 저항
The CG125 front headlight assembly uses the original factory square lamp, with mounting holes that match the CG125 headlight bracket 1:1. It is suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models, and can replace the original headlight directly without modification. It ...
CG125 오토바이 클러치 어셈블리, 마찰판 포함 다양한 스타일
CG125 motorcycle clutch assembly, covering ZT-CG-0251 (split model), 0252/0254-0259 (integrated model) and other different structures, fully match with the whole version of CG125 clutch system, directly replace the original assembly without modification; Including friction plate (wood chip + steel ...
