"motorcycle body accessories"
YBR125 モーターサイクルのアクセサリー 25/30MM 波プレートベアリング 推力ボールベアリング部品
YBR125 motorcycle wave plate bearing, the inner diameter of the upper bead top is 25MM, the inner diameter of the lower bead top is 30MM, the outer diameter of the steel bowl is 48MM, and the installation position of the YBR125 wave plate is completely matched, direct replacement without adjusting ...
耐燃性CGシリーズ バイクロック 電気ドアロック 耐磨性
CG series motorcycle electric door lock, the installation hole position, wiring specifications and CG series motorcycle power supply system fully match, directly replace the original electric door lock without adjusting the line; Support "OFF (power off) -ON (power on) -ACC (accessory)" gear switch, ...
YBR125 モーターサイクルのブレーキホース フロントブレーキ 高圧ホース 長さ930MM
YBR125 motorcycle brake oil pipe, length 930MM and YBR125 front brake pipe fully match, both ends of the joint is suitable for the upper and lower pump interface, direct replacement without cutting adjustment; The pipe body adopts high pressure rubber + braiding reinforcement layer, which is anti...
CG125 モーターサイクルのアクセサリー 排気管 スクリューナッツセット
CG125 motorcycle exhaust pipe screw and nut set, the size and thread of the screw and nut match the CG125 exhaust pipe installation hole, directly replace the original fixed parts, no need to modify the exhaust pipe/cylinder head interface; Stainless steel + copper plating process, sun and rain ...
鍵の電源制御ユニットを持つYBR125多位置オートバイロック
YBR125 motorcycle electric door lock, lock body size, installation hole position and YBR125 handlebar interface fully match, wiring specifications compatible with the original factory circuit, direct replacement without changing the hole/line; Support "OFF (power off) -ON (power on) -ACC (accessory ...
マルチステージ CG125 オートバイ エンジン始動システム用始動シャフト
CG125 motorcycle starting shaft, shaft body size, gear/spline structure and CG125 starting system fully match, directly replace the original starting shaft, compatible with starting plate, starting gear and other components, without changing the starting structure; Using high quality alloy steel ...
ベアリングOリング付き合金鋼YBR125オートバイカムシャフト 耐摩耗性
YBR125 motorcycle camshaft, shaft diameter, CAM profile and YBR125 cylinder head exactly match, with the outer 6003 / inner 6002 bearing + O-ring, directly replace the original camshaft, no additional purchase of accessories; Using Japanese technology processing, CAM profile accurately matches the ...
防錆 YBR125 オートバイシリンダーヘッドアセンブリ エンジンシリンダーヘッドアセンブリ
YBR125 motorcycle cylinder head assembly, cylinder head, side cover, seals and other accessories are fully matched with the engine, one-stop replacement without additional purchase of accessories; Cylinder head and side cover are made of high strength aluminum alloy casting, excellent heat ...
YBR125 オートバイアクセサリー チェーン トップ タイミングチェーン オートマチックテンショナー
YBR125 motorcycle chain top, the installation hole position, push rod size and YBR125 engine timing chain cabin fully match, directly replace the original chain top without adjusting the installation position; Built-in spring/hydraulic automatic tensioning structure, real-time compensation of the ...
CG125 オートバイ フロントヘッドライトアセンブリ エンジニアリングプラスチック 耐熱性
The CG125 front headlight assembly uses the original factory square lamp, with mounting holes that match the CG125 headlight bracket 1:1. It is suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models, and can replace the original headlight directly without modification. It ...
CG125 モーターサイクルのクラッチ組成 摩擦プレートを含む様々なスタイル
CG125 motorcycle clutch assembly, covering ZT-CG-0251 (split model), 0252/0254-0259 (integrated model) and other different structures, fully match with the whole version of CG125 clutch system, directly replace the original assembly without modification; Including friction plate (wood chip + steel ...
