-
YBR125 오토바이 앞뒤 이너 튜브 세트 2.75-18 + 뒤 90/90-18 부틸 고무 이너 튜브
YBR125 motorcycle front and rear inner tube suit, front inner tube (2.75-18), rear inner tube (90/90-18) specifications and the corresponding outer tube completely match, after inflation to fit the outer tube without loosening; Made of aging resistant butyl rubber, good air tightness, strong ...
-
YBR125 오토바이 앞 및 뒷 외부 타이어 세트 2.75-18 + 뒷 90/90-18 타이어
YBR125 motorcycle front and rear tire set, front tire (2.75-18 42P), rear tire (90/90-18 51P) specifications and the original wheel rim completely match, direct replacement without adjusting the wheel rim; The front tread focuses on guiding stability, while the rear tread strengthens the grip and ...
-
YBR125 오토바이 점프 플러그 CR6HSA 저항형 M10*12.7mm 발화 단위
YBR125 motorcycle spark plug, thread specification (M10*12.7mm) and calorific value (CR6HSA) fully match YBR125 engine, direct replacement without adjustment; Built-in resistance element, effectively suppress electromagnetic interference, avoid affecting the vehicle circuit and electronic equipment; ...
-
YBR125 오토바이 가버레이터 수리 키트 가버레이터 밀봉 조정 키트
YBR125 motorcycle carburetor repair kit, parts specifications, seal size and YBR125 carburetor fully match, directly replace the original parts without adjustment; Including gasket, oil needle, screw, spring, snap and other full set of maintenance accessories, covering the common carburettor fault ...
-
YBR125 오토바이 왼쪽 및 오른쪽 스위치 집합 왼쪽 조합 스위치 + 오른쪽 단일 가속 선 스위치
YBR125 motorcycle left and right switch assembly, left combination switch, right single throttle line switch are matched with YBR125 handle interface and circuit specifications, direct replacement without line change; Integrated turn signal, horn and other function buttons, centralized and ...
-
CG125 오토바이 대형 기어 볼트 세트 125 스프레드 엔진 휠체어 부품에 적합한 휠체어 고정 볼트 및 견과류 세트
CG125 motorcycle large sprocket bolts, with bolt size and nut specifications matching CG125 sprocket (large teeth) and rear swingarm mounting holes 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original sprocket fasteners without ...
-
CG125 모터사이클 중앙 샤프트 수갑 후면 스윙어 팔 부시 125 로커 엔진 후면 스윙어 팔 연결 부품에 적합
CG125 motorcycle centre axle bushing, dimensions (outer diameter 25mm / inner diameter 12mm / total length 34mm) perfectly match the connection holes of the CG125 rear swingarm and frame, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original ...
-
CG125 오토바이 튜브 2.50-18/2.75-18 모델, 125 탑 로드 엔진 앞뒤 바퀴 튜브에 적합
CG125 motorcycle inner tube, 2.50-18 (front wheel), 2.75-18 (rear wheel) matches the CG125 corresponding tyre/hub size 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc rocker-engine models, directly replacing the original inner tube without adjustment; made of thickened butyl rubber, ...
