-
YBR125 conjunto de tubos interiores delanteros y traseros de motocicleta 2.75-18 + traseros 90/90-18 tubo interior de caucho butílico
YBR125 motorcycle front and rear inner tube suit, front inner tube (2.75-18), rear inner tube (90/90-18) specifications and the corresponding outer tube completely match, after inflation to fit the outer tube without loosening; Made of aging resistant butyl rubber, good air tightness, strong ...
-
Juego de neumáticos exteriores delanteros y traseros para motocicleta YBR125 2.75-18 + neumáticos traseros 90/90-18
YBR125 motorcycle front and rear tire set, front tire (2.75-18 42P), rear tire (90/90-18 51P) specifications and the original wheel rim completely match, direct replacement without adjusting the wheel rim; The front tread focuses on guiding stability, while the rear tread strengthens the grip and ...
-
Unidad de encendido de tipo M10*12,7 mm de resistencia CR6HSA de la bujía de la motocicleta YBR125
YBR125 motorcycle spark plug, thread specification (M10*12.7mm) and calorific value (CR6HSA) fully match YBR125 engine, direct replacement without adjustment; Built-in resistance element, effectively suppress electromagnetic interference, avoid affecting the vehicle circuit and electronic equipment; ...
-
YBR125 Kit de reparación del carburador de motocicleta Kit de ajuste del sello del carburador
YBR125 motorcycle carburetor repair kit, parts specifications, seal size and YBR125 carburetor fully match, directly replace the original parts without adjustment; Including gasket, oil needle, screw, spring, snap and other full set of maintenance accessories, covering the common carburettor fault ...
-
YBR125 motocicleta conjunto de interruptor izquierdo y derecho con interruptor combinado izquierdo + interruptor de línea de acelerador único derecho
YBR125 motorcycle left and right switch assembly, left combination switch, right single throttle line switch are matched with YBR125 handle interface and circuit specifications, direct replacement without line change; Integrated turn signal, horn and other function buttons, centralized and ...
-
CG125 conjunto de pernos de engranaje de motocicleta de gran tamaño, pernos de fijación de engranajes de engranaje y tuerca adecuados para piezas de engranajes de motor de engranajes de engranajes de engranajes de engranaje de 125
CG125 motorcycle large sprocket bolts, with bolt size and nut specifications matching CG125 sprocket (large teeth) and rear swingarm mounting holes 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original sprocket fasteners without ...
-
Buje de basculante trasero de la manga del eje central de la motocicleta CG125 adecuado para componentes de conexión del basculante trasero del motor balancín 125
CG125 motorcycle centre axle bushing, dimensions (outer diameter 25mm / inner diameter 12mm / total length 34mm) perfectly match the connection holes of the CG125 rear swingarm and frame, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original ...
-
CG125 tubo interior de motocicleta modelo 2.50-18/2.75-18 adecuado para 125 cilindros delantero y trasero del motor
CG125 motorcycle inner tube, 2.50-18 (front wheel), 2.75-18 (rear wheel) matches the CG125 corresponding tyre/hub size 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc rocker-engine models, directly replacing the original inner tube without adjustment; made of thickened butyl rubber, ...
