-
YBR125 موتورسیکلت جلو و عقب لوله داخلی مجموعه 2.75-18 + عقب 90/90-18 لوله داخلی لاستیک بوتیل
YBR125 motorcycle front and rear inner tube suit, front inner tube (2.75-18), rear inner tube (90/90-18) specifications and the corresponding outer tube completely match, after inflation to fit the outer tube without loosening; Made of aging resistant butyl rubber, good air tightness, strong ...
-
YBR125 موتورسیکلت پیشرو و عقب تایر بیرونی مجموعه 2.75-18 + تایر 90/90-18 عقب
YBR125 motorcycle front and rear tire set, front tire (2.75-18 42P), rear tire (90/90-18 51P) specifications and the original wheel rim completely match, direct replacement without adjusting the wheel rim; The front tread focuses on guiding stability, while the rear tread strengthens the grip and ...
-
YBR125 موتورسیکلت سیب بخار CR6HSA مقاومت نوع M10 * 12.7mm واحد روشنایی
YBR125 motorcycle spark plug, thread specification (M10*12.7mm) and calorific value (CR6HSA) fully match YBR125 engine, direct replacement without adjustment; Built-in resistance element, effectively suppress electromagnetic interference, avoid affecting the vehicle circuit and electronic equipment; ...
-
YBR125 کیت تعمیر کاربوریتر موتورسیکلت کیت تنظیم مهر کاربوریتر
YBR125 motorcycle carburetor repair kit, parts specifications, seal size and YBR125 carburetor fully match, directly replace the original parts without adjustment; Including gasket, oil needle, screw, spring, snap and other full set of maintenance accessories, covering the common carburettor fault ...
-
مجموعه سوئیچ چپ و راست موتورسیکلت YBR125، سوئیچ ترکیبی چپ + سوئیچ تک گاز راست
YBR125 motorcycle left and right switch assembly, left combination switch, right single throttle line switch are matched with YBR125 handle interface and circuit specifications, direct replacement without line change; Integrated turn signal, horn and other function buttons, centralized and ...
-
مجموعه پیچ دنده بزرگ موتورسیکلت CG125، پیچ و مهره ثابت کننده چرخ دنده مناسب برای قطعات چرخ دنده موتور 125 میله ای
CG125 motorcycle large sprocket bolts, with bolt size and nut specifications matching CG125 sprocket (large teeth) and rear swingarm mounting holes 1:1, compatible with Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original sprocket fasteners without ...
-
بوش طبق عقب موتورسیکلت CG125 مناسب برای بوش طبق عقب موتور 125، قطعات اتصال دهنده طبق عقب
CG125 motorcycle centre axle bushing, dimensions (outer diameter 25mm / inner diameter 12mm / total length 34mm) perfectly match the connection holes of the CG125 rear swingarm and frame, suitable for Honda CG125, Pearl River 125 and other 125cc pushrod engine models, directly replacing the original ...
-
تیوب داخلی موتورسیکلت CG125 مدل 2.50-18/2.75-18 مناسب برای موتور 125 میله بالایی، تیوب داخلی چرخ جلو و عقب
CG125 motorcycle inner tube, 2.50-18 (front wheel), 2.75-18 (rear wheel) matches the CG125 corresponding tyre/hub size 1:1, suitable for Honda CG125, Pearl River 125 and other 125cc rocker-engine models, directly replacing the original inner tube without adjustment; made of thickened butyl rubber, ...
