CG125 starter motor 12V 0.8KW suitable for Honda CG125, Zhuhai ZJ125, Xingfu XF125 125cc motorcycle starter motor
Product Details
| Product Name: | CG125 Motor (Starter Motor) | Model: | 12V 0.8KW/1.0KW Starter Motor |
|---|---|---|---|
| Rated Voltage: | 12V DC | Reduction Ratio: | 4.5:1–5.5:1 |
| No-load Speed: | 5000–6000r/min | Number Of Teeth On The Driving Gear: | 9 Teeth |
| Net Weight: | Approximately 1.8–2.2kg | Warranty Period: | One Year |
| Installation Dimensions: | The Fixed Hole Pitch Is About 60mm, And The Shaft Length Is About 35mm | Packaging Type: | Colour Box With Colour Bag/bubble Bag With White Box |
| Customised Service: | Packaging/logo (leave Contact Details For More Information) | ||
| Highlight |
high strength motorbike body parts,Motorcycle Body accessories high performance |
||
Product Description
The CG125 motor (starter motor) is the core component of the engine starting system. It drives the rotor to rotate via 12V DC power and drives the engine crankshaft through a reduction gear to achieve cold or hot engine starting. It is compatible with the Honda CG125 and Zhuhai ZJ125, Xingfu XF125, and other 125cc four-stroke overbone motorcycles on the same platform, ensuring smooth and durable starting. Before installation: Confirm the motor model (power/reduction ratio) is consistent with the original vehicle and check the engagement gap between the drive gear and flywheel ring (about 0.3–0.5mm); During installation: Secure with bolts (torque 15–20 N·m), connect the power wire (red) and ground wire (black/green), ensuring secure wiring (the power wire should include a 50A fuse in series); Routine maintenance: Regularly check brush wear (every 10000 km) and replace promptly if severely worn; Avoid long continuous pressing during start-up (single press ≤5 seconds to prevent coil overheating); In winter low temperatures, preheat the battery first (e.g., idle charging for 5 minutes) before starting the motor to reduce starting resistance.
Product Highlights
The CG125 motor (starter motor) is the core component of the engine starting system. It drives the rotor to rotate via 12V DC power and drives the engine crankshaft through a reduction gear to achieve cold or hot engine starting. It is compatible with the Honda CG125 and Zhuhai ZJ125, Xingfu XF125, ...
YBR125 Motorcycle Starter Motor High Torque Starting Power Components
YBR125 motorcycle starting motor, the installation hole position, gear specifications and YBR125 starting system fully match, directly replace the original motor, without modifying the interface or adjusting the gear clearance; Permanent magnet motor design with Japanese technology, sufficient ...
YBR125 Motorcycle Gasket Set Full Engine Gasket Set Wear Resistance
YBR125 motorcycle gasket set, covering cylinder head, box, side cover and other key parts of the special gasket, hole position/size strictly match YBR125 engine and box interface, one-stop solution to the whole vehicle sealing requirements; Using oil resistant rubber + metal skeleton composite ...
Oil Resistant YBR125 Motorcycle Parts Cylinder Up And Down Pad Set Engine Cylinder Seal Gasket
YBR125 motorcycle middle cylinder upper and lower pad suit, the hole position and size of the upper pad and lower pad match the YBR125 middle cylinder completely, directly replace the original gasket, no need to adjust the middle cylinder installation position; Using oil resistant rubber + metal ...
High Hardness YBR125 Motorcycle Spare Parts Start Shaft Assembly
YBR125 motorcycle starting shaft assembly, shaft diameter, gear tooth shape and YBR125 engine foot starting system fully match, directly replace the original starting shaft, no need to modify the starting mechanism; Shaft body and gear adopt carburizing and quenching process, high hardness, wear ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
